Migrate to 14

npm install --save-dev syncpack

Command Changes

`list-mismatches` → `lint`

# v13
syncpack list-mismatches --types prod,dev
# v14
syncpack lint --dependency-types prod,dev

`lint-semver-ranges` → `lint`

list-mismatches and lint-semver-ranges have been merged into a single lint command which checks whether every specifier matches the semver group and version group they belong to. The lint command no longer checks formatting, which is now handled by syncpack format ––check. It's no longer possible to manage semver ranges without also checking version mismatches, because the two things are so closely linked. Changes to semver ranges affect which versions are considered valid and can indirectly cause version mismatches, so they are now always checked and changed together via the lint and fix commands.

# v13
syncpack lint-semver-ranges
# v14
syncpack lint

`fix-mismatches` → `fix`

# v13
syncpack fix-mismatches
# v14
syncpack fix

`set-semver-ranges` → `fix`

fix-mismatches and set-semver-ranges have been merged into a single fix command which autofixes issue found by syncpack lint. The fix command no longer fixes formatting, which is now handled by syncpack format. It's no longer possible to manage semver ranges without also checking version mismatches, because the two things are so closely linked. Changes to semver ranges affect which versions are considered valid and can indirectly cause version mismatches, so they are now always checked and changed together via the lint and fix commands.

# v13
syncpack set-semver-ranges
# v14
syncpack fix

`prompt` → Removed

The prompt command is an interactive prompt which lists all current issues which syncpack can't fix automatically. It is not yet available in v14 and will be added at a later date. Syncpack can't automatically fix mismatches between specifiers it does not support, which are usually specifiers which are not semver, such as pnpm overrides, or complex semver specifiers like ^1.2.3 || ^2.0.0.

# v13
syncpack prompt
# v14
# Not yet implemented

CLI Option Changes

`--types` → `--dependency-types`

Renamed for consistency and also to differentiate it from other types such as specifier types.

# v13
syncpack list-mismatches --types prod,dev
# v14
syncpack lint --dependency-types prod,dev

`--specs` → `--specifier-types`

Renamed for consistency.

# v13
syncpack format --specs exact,range
# v14
syncpack format --specifier-types exact,range

`--filter` → `--dependencies`

This has been renamed to dependencies to match the equivalent property of version groups and semver groups. Regular expressions are no longer supported and instead a glob pattern should be provided in the same way as they are for version groups and semver groups.

# v13
syncpack list-mismatches --filter "^@types\/.+"
# v14
syncpack lint --dependencies "@types/**"

Config Changes

`dependencyTypes` removed

The dependencyTypes config has been removed in favour of using versionGroups config, which achieves the same result:

{
  // Removed in v14
  "dependencyTypes": ["prod", "dev", "peer"],
  // Use instead
  "versionGroups": [
    {
      "label": "Ignore everything except dependencies, devDependencies, and peerDependencies",
      "dependencies": ["!prod", "!dev", "!peer"],
      "isIgnored": true,
    },
  ],
}

Or use the --dependency-types CLI option to filter on an ad hoc basis:

syncpack lint --dependency-types prod,dev,peer

`specifierTypes` removed

The specifierTypes config has been removed in favour of using versionGroups config, which achieves the same result:

{
  // Removed in v14
  "specifierTypes": ["exact", "range"]
  // Use instead
  "versionGroups": [
    {
      "label": "Ignore everything except exact (1.2.3) or range (>=1.2.3, ~1.2.3 etc) specifier types",
      "specifierTypes": ["!exact", "!range"]
      "isIgnored": true,
    },
  ],
}

Or use the --specifier-types CLI option to filter on an ad hoc basis:

syncpack format --specifier-types exact,range

`lintFormatting` removed

The lint command no longer checks formatting, only version mismatches, so the lintFormatting option is no longer needed. If you don't want to lint or fix formatting, you can just not use syncpack format or syncpack format --check.

format handles formatting, lint and fix handle version issues.

{
  // Removed in v14
  "lintFormatting": false,
}

# Check if formatting needed (exit 1 if needed)
syncpack format --check
# Safely see what formatting fixes would look like
syncpack format --dry-run
# Write formatting fixes to disk
syncpack format

`lintSemverRanges` removed

It's no longer possible to manage semver ranges without also checking version mismatches, because the two things are so closely linked. Changes to semver ranges affect which versions are considered valid and can indirectly cause version mismatches, so they are now always checked and changed together via the lint and fix commands.

V14 will always lint semver ranges when checking for version mismatches, but this will only apply to you if you have semverGroups defined. Let's say your project has react installed in three places: two of them use exact versions (19.1.0 and 19.1.1) and one of them belongs to a Semver Group which requires a ^ range so has a version of ^19.1.0. Syncpack will synchronise these versions so that the highest version of 19.1.1 is used everywhere, while respecting the Semver Group requirement of ^19.1.1 being used for the member of that group.

{
  // Removed in v14
  "lintSemverRanges": false,
}

`lintVersions` → Always enabled

This option is redundant in V14.

{
  // Removed in v14
  "lintVersions": false,
}

Migrating from older versions

Version 11.2.1

`workspace` dependency type renamed to `local`

The workspace dependency type has been renamed to local for clarity.

# v11.2.0 and earlier
syncpack list --types prod,workspace
# v14
syncpack lint --dependency-types prod,local

Version 9.0.0

CLI Options Replaced

Individual boolean flags replaced with --dependency-types option:

# v8
syncpack list --prod --dev --peer
# v14
syncpack lint --dependency-types prod,dev,peer

The following flags were removed:

-p, --prod
-d, --dev
-P, --peer
-R, --resolutions
-o, --overrides
-O, --pnpmOverrides
-w, --workspace

Config Changes

Individual boolean properties replaced with versionGroups configuration:

// v8
{
  "dev": true,
  "overrides": false,
  "peer": true,
  "pnpmOverrides": false,
  "prod": true,
  "resolutions": false,
  "workspace": true
}
// v14 (use versionGroups instead)
{
  "versionGroups": [
    {
      "label": "Ignore overrides",
      "dependencyTypes": ["overrides", "pnpmOverrides", "resolutions"],
      "isIgnored": true
    }
  ]
}

Version 8.0.0

pnpm overrides renamed

The --overrides option now refers to npm overrides. pnpm users must use --pnpmOverrides instead.

# v7 (pnpm users)
syncpack list --overrides
# v14 (pnpm users)
syncpack list --dependency-types pnpmOverrides
# v14 (npm users)
syncpack list --dependency-types overrides

Context: v6.0.0 originally added --overrides for pnpm but read from the wrong property. npm later added their own .overrides property, so v8 split these into separate options.

Version 7.0.0

Workspace dependency syncing enabled by default

Syncpack now syncs versions of locally developed packages by default. If package A depends on package B (both in your monorepo), syncpack will fix A's dependency to match B's actual version.

In v14, disable this behavior using versionGroups:

{
  "versionGroups": [
    {
      "label": "Ignore .version properties of local packages",
      "dependencyTypes": ["local"],
      "isIgnored": true,
    },
  ],
}

Or exclude local when using CLI flags:

# v14
syncpack lint --dependency-types '!local'

Version 6.0.0

`resolutions` and `overrides` enabled by default

Yarn's resolutions and pnpm's overrides fields are now processed by default.

In v14, exclude them using versionGroups:

{
  "versionGroups": [
    {
      "label": "Ignore overrides",
      "dependencyTypes": ["resolutions", "overrides", "pnpmOverrides"],
      "isIgnored": true,
    },
  ],
}

Or via CLI:

# v14
syncpack lint --dependency-types dev,peer,prod

Version 3.0.0

`--source` option changed

Package locations now specified with repeatable --source option instead of positional arguments:

# v2
syncpack list './package.json' './packages/*/package.json'
# v14
syncpack list --source './package.json' --source './packages/*/package.json'

Migrate to 14

Command Changes

list-mismatches → lint

lint-semver-ranges → lint

fix-mismatches → fix

set-semver-ranges → fix

prompt → Removed

CLI Option Changes

--types → --dependency-types

--specs → --specifier-types

--filter → --dependencies

Config Changes

dependencyTypes removed

specifierTypes removed

lintFormatting removed

lintSemverRanges removed

lintVersions → Always enabled

Migrating from older versions

Version 11.2.1

workspace dependency type renamed to local

Version 9.0.0

CLI Options Replaced

Config Changes

Version 8.0.0

pnpm overrides renamed

Version 7.0.0

Workspace dependency syncing enabled by default

Version 6.0.0

resolutions and overrides enabled by default

Version 3.0.0

--source option changed

`list-mismatches` → `lint`

`lint-semver-ranges` → `lint`

`fix-mismatches` → `fix`

`set-semver-ranges` → `fix`

`prompt` → Removed

`--types` → `--dependency-types`

`--specs` → `--specifier-types`

`--filter` → `--dependencies`

`dependencyTypes` removed

`specifierTypes` removed

`lintFormatting` removed

`lintSemverRanges` removed

`lintVersions` → Always enabled

`workspace` dependency type renamed to `local`

`resolutions` and `overrides` enabled by default

`--source` option changed